FD Dry Floor Heating System is a new breakthrough in floor heating industry. In this system, heating pipes are installed in each slot between the FD dry floor heating boards. Since heating pipes can be perfectly fit into each slot, such radiant floor heating system can be directly installed on the surface course without filling concrete, and categorized into the following two
1.The system is compatible with the development of prefabricated buildings and green buildings;
2.Heat up quickly within 1 hour;
3.Energy efficient and low operation cost, approximately 50% of wet floor heating;
4.Saving at least 15 days of construction time because of dry construction and prefabricated technology;
5.Low load: The dry floor heating structure load is approximately 55kg/m2, which can reduce the load by 105kg/m2 compared to the wet floor heating of 160kg/m2; with less thickness and low bulk density. Compared with traditional wet floor heating, the high-strength dry floor heating system can reduce the total load by 40%, reduces the total amount of steel bars by 11% and the total amount of concrete by 5%, effectively reducing construction costs. Through the dry floor heating system, the total number of piles can be reduced by 5%, and the weight of the entire building can be reduced by 12%.
6.ave floor height by 60% compared to wet floor heating. A building with around 30 floors can save an additional rooftop floor through the early design and optimization.
